JTAG Connectors – Not Your Typical Connector

JTAG Connectors or the Joint Test Action Group Connectors usually are not known by most people. But what do these connectors do?

A JTAG Connector provides a low-level hardware debugging interface to a variety of processors, including the PXA255 on the gumstix. FAQ information on gumstix Development and Programming here.
The boot-auto.mac file is an OCD Commander script to initialize RAM and flash on the gumstix, set up the PXA, and load a u-boot SREC file.
Run this macro script in OCD Commander and it should initialize the gumstix, load u-boot to RAM, and execute it.

A JTAG Connector provides a low-level hardware debugging interface to a variety of processors, including the PXA255 on the gumstix. FAQ information on gumstix Development and Programming here.The boot-auto.mac file is an OCD Commander script to initialize RAM and flash on the gumstix, set up the PXA, and load a u-boot SREC file.Run this macro script in OCD Commander and it should initialize the gumstix, load u-boot to RAM, and execute it.

~ by mirksmith on June 6, 2010.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: